[wpseo_breadcrumb]

SPB-500-Slim

Plan 53B system for pressurised dual seals in accordance with ISO 21049:2004 1st edition.

Standard configuration

Design ASME VIII, div. 1/not stamped and/or European regulations (CE) such as PED 97/23/ EC – Cat. 3 / ATEX – Zone 2 II/A T1-T3 Suitable for general oil/water service – Non-hazardous. Design 40 barg @ -15/+90°C / ANSI 300#-sch.40s. Wetted parts AISI 316(L) / with SS 304 studbolts and a Cr-Mo alloyed steel accumulator, standard size 10 ltr. To- and from seal connections ANSI 3/4″ 300# RF smf. Further client connections ANSI 1/2″ 300# RF smf. Electrical conduit connections: ISO M20x1,5 mm Engineering units: SI units, Bar/°C. NDE: Visual-/hydrostatic and leaktesting.

SPB-500-Slim Opbouw

Surface preparation: Flopac standard 3 layer epoxy system

9

One heat exchanger

As appropriate, refer to the section heat exchangers

9

One pressure alarm

United Electric ATEX II 1/2 G .- Ex(ia) IIC T4 certified wetted parts SS316. Other makes/types on request.

9

One reservoir

Refer to section accumulators

9

One pressure gauge

Make Badotherm, type BDT18 – 0/40 bar, ½”NPT Dial 100mm with safety glass and blowout disc.

Options

9

lternative material selections for specific services like HF and H2S (NACE) services

9

The addition of Flopac refill / make-up units and quick connectors to accommodate these units.

9

These units can be tailored to all your specific demands.

9

The use of Smart pressure transmitters instead of switches for alarm functions.

9

High pressure designs (ANSI 600# / 1500#) for static designs up to 200 barg.

9

The addition of Flopac magnetically driven seal liquid circulation pump units.

9

The addition of a temperature gauge, make Badotherm, skin type TG18 -/-20/+120°C, dial 100mm, made from SS316/SS304. Other makes/types and ranges on request.

Accumulators

The modular construction of the range of Flopac® SPB units easily allows for the (retro)fitting of reservoirs with the following standard volumes: 20, 35 and 50 ltr. Other volumes on request. These reservoirs are commonly built from low alloy Cr/Mo steel with Buna N bladder. Other materials are available on request.

Please contact Flopac for a more detailed advise on all topics related to Flopac® seal support system plan 53B. We will gladly assist.

Neem contact met ons op

Adres

Ditiseenstraat 1

1234AB Stad

Nederland

 

Telefoonnummer

(346) 234-5675

Email

info@flopac.com